Process design method of CNC machining
Release time:
2023-03-16 17:10
1. Scientific planning of the knife route
In the past part processing process, due to the lack of reasonable tool path planning, the machining efficiency has been difficult to improve, and the machining accuracy will be affected and weakened. Therefore, the process design method of CNC machining should take improving the energy efficiency of processing as the entry point, and organically combine the processing requirements of parts with the process design. Therefore, when selecting a method, the staff should scientifically control the tool route to ensure that the toolpath reaches the optimal range and the distance is controlled in a short line. On the one hand, it can realize the optimal utilization of resources, reduce resource losses, and promote the steady improvement of production efficiency. On the other hand, the machining accuracy can be basically guaranteed, and the production quality of parts can be relatively improved.
2. Unified arrangement of processing process
The high-quality completion of any machining operation requires a sound production process to provide it with an active and effective boost, and the same is true in the parts manufacturing industry. It needs to effectively connect the various processes, so when designing the process of CNC machining, each process should be included in the key considerations, and scientific and reasonable detailed planning is required. This needs to be done: First, whether the process arrangement is reasonable requires a standardized system to constrain and control the clamping frequency to a minimum. Secondly, it is necessary to continuously improve the employment threshold of operators, especially to make employees proficient in CNC machining programming, so that the CNC machining effect can reach the ideal state.
3. Clarify the processing method and determine the amount of cutting
Before CNC machining and cutting, employees must make a complete cutting plan, clarify all aspects of the cutting process, such as cutting position, cutting intake, shortest route, etc., and determine the CNC machining and cutting amount. In the actual CNC machining process, whether it is rough machining, semi-machining, or finishing, the choice of cutting amount cannot be determined according to subjective assumptions, and must be carried out with reference to the rules and regulations of CNC machining.
CNC machining
Related news
2019-09-02
Suzhou Yueerhan Machinery Technology Co., Ltd
In order to make the company more competitive, it invested 20 million yuan in 2010 and 5 million yuan in 2018 to add die-casting machines, X-ray flaw detection equipment, spectral analysis equipment and various product performance testing equipment, so that the quality of products can be effectively controlled. The company has passed ISO9001-2015 certification, in order to meet the needs of customers. Adhering to the enterprise tenet of "pursuing good quality and timely service", our company constantly promises and serves customers with perfect service and scientific management, and creates a better tomorrow with you!
2019-09-02
Suzhou Yueerhan Machinery Technology Co., Ltd
The company is located in the scenic Yangcheng Lake in Xiangcheng District, Suzhou, bordered by Shanghai-Nanjing Expressway in the north and Sujiahang Expressway in the east, with convenient transportation. Founded in 1993, the company is mainly engaged in the manufacturing, sales and service of drum washing machine bracket shaft, tripod, pulley, door hinge, door hook, cross, wind impeller, bearing seat, etc.
2019-09-24
Yueerhan machinery technology service tenet
Suzhou Yueerhan Machinery Technology Co., Ltd. was established in 1993, the company is located in the scenic Yangcheng Lake in Suzhou Xiangcheng District, north of Shanghai-Nanjing Expressway, east of Sujiahang Expressway, convenient transportation.
2019-09-24
China's GDP accounting reform is a contribution to the world
The three major international organizations praised China's GDP accounting reform as a contribution to the world
2019-09-24
Made in China from "usable" to "well-used" and "easy to use"
Consumers expect that after China's manufacturing has completed the upgrade from "usable" to "well-used", it can also achieve the upgrade from "well-used" to "easy-to-use", which puts forward higher requirements for supply-side services.
2019-09-24
Spend a good full moon and happy Mid-Autumn Festival
Spend a good full moon and happy Mid-Autumn Festival